According to the stop position of the door leaf, determine the position of the base on the ground and draw a line. Drill two φ6 holes in the ground, and use a hammer to drive in the plastic rubber plug. Fix the base of the door stopper on the ground with screws. Screw the bottom cover of the suction base into the bottom cover of the suction base. Determine the position of the suction head, accurately position the suction head and the suction base, and draw a line to fix the suction head bottom cover. Screw the tip body into the bottom cover of the tip. Use real samples.
Half moon Door Stop with rubber suction installation:
First determine the position of the door stopper on the door leaf. Mark the center of the screw hole position on the wall heel according to the product hole. Drill three φ6 holes in the wall. Use a hammer to drive into the plastic rubber stopper. Fix the screw rod and the base plate of the suction seat on the wall with screws. Screw the suction housing shell into the screw. Determine the position of the suction head, position the suction head and the suction seat accurately, and draw a line to fix the bottom cover of the suction head. Screw the tip body into the bottom cover of the tip. Use real samples.
All raw materials are made of high-quality pure stainless steel 304,
Ensure the stability of the quality from the source
The steel rod is precisely processed, cut, drilled, and threaded by a lathe. After multiple grinding processes, the surface is bright, if there are any scratches
Or blemishes have to be polished again
More than 20 strict quality control tests, only perfect products can pass the polishing without electroplating, the original color of stainless steel is maintained for 48 hours salt spray test, and its high-strength corrosion resistance and abrasion resistance have been tested for several passes After the process, the product is fully inspected to ensure the quality of the factory product.
Post time: Aug-14-2021